Friday, September 4, 2015

HOW TO UNBRICK LENOVO A6000



How to Unbrick Lenovo A6000


Name Size Url
Frimeware Lenovo A6000_S035_150507_8G_ROW.7z 1,2 GB Download
QPST_2.7.422.7z 25 MB Download
Downloader_Lenovo_V1.0.2.7z 1 MB Download
LenovoA6000_USB_driver.7z 9 MB Download
Qualcomm_Usb_Driver.7z 2 MB Download
7-Zip.exe Variants Download

TWO METHODS FOR UNBRICK LENOVO A6000



Note : Always sew charged (preferably not less than 70%) of the smartphone!

( FIRST METHODS )

Installing the firmware using QFIL on Lenovo devices based on Qualcomm chips
5498006cae276_Chip.png
549801917d606_QualcommLogo.png
Preparatory stage.
1. Extracts using 7-Zip.exe and install drivers for chips Qualcomm and QPST.2.7.422.msi
2. Decompress A6000_S035_150507_8G_ROW.7z using 7-Zip.exe  to the root of any drive.
1.png
3. Check whether to install the necessary drivers.
Open the Device Manager on your PC, then turn off the device (smartphone or tablet) and take out the USB-cable from the device (if it was connected).
Then we press the Volume Up key (Volume Up) and holding it connect USB-cable which is already connected to the USB 2.0 port of your PC – in the Device Manager device should appear Qualcomm Lenovo HS-USB QDLoader 9008
54980dd0da5da_0.png
Just install the firmware!
1. Run the utility QFIL (Start> All Programs> QPST> QFIL).
post-53625-0-67498900-1417520795.png
2. In the window QFIL fill in the following fields:
In the Programmer patch specify the path to the file prog_emmc_firehose_89XX.mbn (in my case prog_emmc_firehose_8916.mbn), for this click on Knop «Browse», in the window that opens, specify the path to the folder with the firmware (in my case ROW_S121), then select the file prog_emmc_firehose_89XX. mbn and click “Open.”
Then click on the digging «Load XML …», in the window that opens, select one by one – first rawprogram0.xml and click “Open” and then patch0.xml and also click “Open.”
2.png
3. Make sure that the program QFIL sees the device as Qualcomm Lenovo HS-USB QDLoader 9008.
3.png
4. Click on the button «Download» and wait for the end of the process.
The device should restart the process of filling in the successful firmware and boot into Android OS.
4.png
——————————————————————————————————

( SECOND METHODS )

Installing the firmware using Lenovo Downloaders.
1. Installing the USB driver
Download and unzip LenovoA6000_USB_driver.7z , Run as administrator and all items are selected by default, click Next everywhere
16b3a6cc24f21fe268814a2d6bd92f4d.png
2. To install the device in 9091 mode, I recommend to start the process of firmware A6000 turn off, holding down the Volume up, turn the power button A6000, after vibro release the power button, and then after a couple of seconds, releasing the volume – set the device to PC mode 9091.
Firmware smartphone through Downloader_Lenovo_V1.0.2
Download and extract to a folder without spaces and letters  Downloader_Lenovo_V1.0.2.7z (he and the driver came with firmware). Run as administrator flasher.
3. Preferences change is not necessary, they are permanent :
93605f87e500be6127d21fae293155e1.png
4. Select the folder in which you unzipped the firmware :
49ee79477b3d78eaf1c932f38ab9d668.png
5. Press the start button of the firmware :
e871e76edef3fab920b2b59d3221f593.png
6. Turn off the smartphone, hold down the volume up, turn the power button smartphone, after vibro release the power button and then after a few seconds by releasing the volume button – you will see this menu :
356ae62a7488fbe9bee1ecc2b58a5df3.jpg
7. Connect your smartphone to your PC with a USB cable to the port (preferably black, USB 2.0) on the back of your PC (on the motherboard). The program will translate it into a flashing mode when you first plug it in, install the drivers for new devices and smartphone will be sewn :
8c8b3519772c96eb0e182755eb1ca559.png
8. The flash will take 6-7 minutes, the end of the program will tell you :
e4a502a7e301c8a2f0ff43e944a11d05.png
9. Turn off your smartphone, after the first start by entering the region code after changing the region recommend to immediately wipe do – and use your smartphone!
PS And a few wishes and parting words:
  • If you do not have the strength to even install the drivers for the chips Qualcomm, the likelihood of a successful process of pouring firmware drops to 3%.
  • I advise you to make a fill flash with a PC that is running Windows 7 (in Windows 8.1, but the likelihood of a successful process of pouring firmware reduced to 30%).
  • The whole process of the firmware with this method is safe, but only in the right hands!
  • Good luck to all!

24 comments:

  1. Hello geeks ..i have rooted my A6000 with kingroot with out custom recovery ; how to unroot for receving OTA updates..please reply

    ReplyDelete
    Replies
    1. you will get updates without unrooting your device(but updating will brick your device)
      as far as we know we wont get updates...yet

      do factory reset and flash the lollipop update

      Delete
    2. sorry to disturb u again..can i install without any recovery ?

      Delete
    3. from this link ?
      http://mightylenovoa6000andplus.blogspot.com/2015/09/how-to-update-lenovo-a6000-to-android.html

      Delete
  2. A6000 started receiving lollipop 5.0

    ReplyDelete
  3. This comment has been removed by the author.

    ReplyDelete
  4. can this unbricking work in lollipop updated lenovo a6000

    ReplyDelete
  5. Hey Venky can you Provide KITKAT ROM for Lenovo A6000 Plus ? And Can you provide solution to revert back to KITKAT on Lenovo A6000 Plus ?

    ReplyDelete
  6. Pls help me venky my a6000 bricked now stuck on logo what to do now pls pls help me

    ReplyDelete
  7. Pls help me someone my phone bricked and stuck on logo

    ReplyDelete
  8. This site has been blocked as per instructions from Department of Telecom (DOT) .All your Ad.fly links are banned. If you are here to just help people, keep money out of it. And one more thing, better focus on your English, half of the time I had to rely on screenshots. Didn't even look at what you wrote, that's because I was sure I won't understand a single word of yours.

    ReplyDelete
    Replies
    1. holly s....
      are kidding us....
      it's the at least one which we get in return....
      so,don't blame on us for adfly links....
      and we are not jobless to look every single word in posts

      Delete
  9. hello! need help! my lenovo a6000 plus was rooted and due to some foolish errors of a relative my phone has bricked and is stuck on the boot screen logo....is it possible to unbrick my phone and if so could you please help me with a step by step tutorial on how to unbrick it!? thanks

    ReplyDelete
  10. heya...bhaii i am getting it as into 9091(com3) port...instead of 9008(com3) port...now tell me what should i do to make d port into 9008 . i have tried exactly what u displayed in d content, but the driver of its 9008 dint install... what to do now?

    ReplyDelete
  11. i want lenovo a 6000 plus rom this is a6000 rom please help

    ReplyDelete
  12. its 8gb rom i want 16 gb and 2 gb ram

    ReplyDelete
  13. hai venkat...iam naveen kandula, i was installed custom rom in my lenovo a6000. after installing custom rom my phone was not shows sim network and sound is gone.so plz help me
    how to get sim network and sound.

    ReplyDelete
  14. Sir
    Lenovo a6000 ka firmware lenovo a6000 plus me use kar sakte hai.? Mera lenovo a6000 plus brick ho gaya hai.

    ReplyDelete
  15. Sir
    Lenovo a6000 ka firmware lenovo a6000 plus me use kar sakte hai.? Mera lenovo a6000 plus brick ho gaya hai.

    ReplyDelete
  16. Qualcomm HS-USB QDLoader 9008 no port how to slove

    ReplyDelete
  17. But my device only shows hs 9091 diagnosis port fix please.

    ReplyDelete
  18. But my device only shows hs 9091 diagnosis port fix please.

    ReplyDelete